Pages

Wednesday, July 11, 2012

ICA: Router, Switch and hub

   Router > switch > hub. with this you can easily understand what and how do they preform and act as. 
  A hub is like a dumb multiple power where the bandwidth is shared and all its port doesn't have a address of its own thus it cannot track which signal are from which device as the hub itself is identified as a single address.


  Where by a switch is more advanced than a hub as each of its port has its own address and have its own bandwidth without sharing the bandwidth with the other computer connected to the same switch.


  Router is the most advanced of these three and are usually connected to a WAN aka the internet through a cable modem or ADSL modem or any other ISP , it has DHCP, NAT and other advance function such as QoS, Firewall and etc. Some router even have wireless capability thus the name WiFI router, which broadcast the signal to connect eve more devices wirelessly.




  For a more comprehensive explanation please read the paragraph below sourced from other site






In a hub, a frame is passed along or "broadcast" to every one of its ports. It doesn't matter that the frame is only destined for one port. The hub has no way of distinguishing which port a frame should be sent to. Passing it along to every port ensures that it will reach its intended destination. This places a lot of traffic on the network and can lead to poor network response times.

Additionally, a 10/100Mbps hub must share its bandwidth with each and every one of its ports. So when only one PC is broadcasting, it will have access to the maximum available bandwidth. If, however, multiple PCs are broadcasting, then that bandwidth will need to be divided among all of those systems, which will degrade performance.

A switch, however, keeps a record of the MAC addresses of all the devices connected to it. With this information, a switch can identify which system is sitting on which port. So when a frame is received, it knows exactly which port to send it to, without significantly increasing network response times. And, unlike a hub, a 10/100Mbps switch will allocate a full 10/100Mbps to each of its ports. So regardless of the number of PCs transmitting, users will always have access to the maximum amount of bandwidth. It's for these reasons why a switch is considered to be a much better choice then a hub.

Routers are completely different devices. Where a hub or switch is concerned with transmitting frames, a router's job, as its name implies, is to route packets to other networks until that packet ultimately reaches its destination. One of the key features of a packet is that it not only contains data, but the destination address of where it's going.

A router is typically connected to at least two networks, commonly two Local Area Networks (LANs) or Wide Area Networks (WAN) or a LAN and its ISP's network . for example, your PC or workgroup and EarthLink. Routers are located at gateways, the places where two or more networks connect. Using headers and forwarding tables, routers determine the best path for forwarding the packets. Router use protocols such as ICMP to communicate with each other and configure the best route between any two hosts.

Today, a wide variety of services are integrated into most broadband routers. A router will typically include a 4 - 8 port Ethernet switch (or hub) and a Network Address Translator (NAT). In addition, they usually include a Dynamic Host Configuration Protocol (DHCP) server, Domain Name Service (DNS) proxy server and a hardware firewall to protect the LAN from malicious intrusion from the Internet.

All routers have a WAN Port that connects to a DSL or cable modem for broadband Internet service and the integrated switch allows users to easily create a LAN. This allows all the PCs on the LAN to have access to the Internet and Windows file and printer sharing services.

Some routers have a single WAN port and a single LAN port and are designed to connect an existing LAN hub or switch to a WAN. Ethernet switches and hubs can be connected to a router with multiple PC ports to expand a LAN. Depending on the capabilities (kinds of available ports) of the router and the switches or hubs, the connection between the router and switches/hubs may require either straight-thru or crossover (null-modem) cables. Some routers even have USB ports, and more commonly, wireless access points built into them



SOURCE

1 comment:

Unknown said...

This is a really helpful blog. You have some great ideas.
iTach